Hines Industries, Inc. - HC-500 Crankshaft Balancer Mill/Drill Option

Drill Press Option

The Mill/Drill Combination allows the operator to make necessary corrections without leaving the machine. The drill can be purchased without a mill table.

The mill/drill head rotates 180 degrees to accommodate the separate functions: mill pistons and rod ends, or drilling and tapping operations, all with the same machine. Optional features:

Milling, drilling, and tapping
Workpiece capacity:

cast iron @ 1-9/16"
mild steel @ 1-1/4"
Massive 3" diameter quill
5" spindle stroke
Head tilts 90 degrees right and left
Lowest tool speed - 60 rpm (60Hz)
R8 collet accepts Bridgeport tooling

Mill/drill shown mounted on the
Dominator Crankshaft Balancer
with graphic depth encoder option
Click image to enlarge.